Two Little Fishies 150 PhosBan Reactor Product Review

This is among the more popular fluidized reactors in use today due to its smaller size, affordable pricing, and flexibility of use. The below information was taken directly from the manufacture’s website

http://www.twolittlefishies.com/documents/1202405781.pdf

PhosBan Reactor 150™

The PhosBan Reactor 150 is designed with the upflow principle to achieve the most efficient use of PhosBan® or other chemical filter media. By pushing water from the bottom upward through a dispersion plate, it forces an even distribution of water through the media, and prevents channeling. It can be mounted hanging on the back of the aquarium or below the aquarium. Hose barb connections are for 1/2 inch i.d. tubing. Includes 1/2 inch barbed ball valve for flow control, and hose clamps. Use with any pump having a capacity between 100 and 250 gph, but regulate the flow rate to the recommended 20 to 30 gallons per hour with the included ball valve.

I have been using one for a few months now and have found it to be very good value for the money.I am currently using mine for biopellets on a sumped 120 gallon FOWLR aquarium. I have friends and fellow hobbyists who swear by this reactor and have been using it for a few years with phosphate removing media.I really like using this reactor in a sump due to the small footprint it takes up and the fact I will not have to worry about it leaking when used in a sump. The below is a list of pros and cons that I have found using this reactor.

Pros:

-Small size can be used in all most any type of sumped set-up with minimal room lost.
-Can easily fit under aquarium stand if not used in a sump
-Can be used in a hang on back style set-up
-Comes with a built in ball valve
-Very reasonably priced

Cons:

-The supplied connectors often leak a very small amount.If used outside a sump or aquarium, you will need to add better clamps to connect the fittings and hose together in order to prevent any leaks
-You will still need to purchase a pump to use it in some configurations.
-It is not convenient to remove and take apart for routine cleaning or replacing media.
-Some types of media can clump up or just not move around the outside edges along the bottom of the reactor.However, this is a common situation to find in all reactors with a similar design.

One quick tip on using this in a sump, if you keep the portion of the reactor with the media in it below the water line in the sump, you will need lover flow rates through the media and the reactor will work better.  I took a picture and inserted it below to help explain what I am talking about.
Overall I am happy with the performance of this reactor and would recommend it to anyone who has a set-up with limited space for a reactor.

Tip of the Week # 4 – Salinity Levels

Your salinity level is among one of the more important parameters in a marine aquarium. Maintaining a proper salinity level will help you establish a proper pH as well as making your alkalinity and calcium levels a lot easier to maintain stable.
So what is the proper salinity level ? Many people have many different opinions about this ranging from 1.020 to 1.029 and they will also have a thought process in support of their options mostly around the type of setup they have. As the more popular fish and corals that we keep in the hobby come from in or near the ocean’s coral reefs with a salinity of around 1.026, I prefer to keep the salinity levels my FOWLR and Reef aquariums at the same level as these areas of the ocean, 1.026 (35ppt).  However, there are some exceptions to that.  The Red Sea for example will have a salinity level of around 1.028 to 1.030 depending on the exact location making it better to have a slightly higher salinity level if keeping fish or corals from the Red Sea.

You really do need to understand the water parameters in the area of the ocean that your fish and corals come from before you develop your own approach to maintaining your salinity.

The below link is to a very handy article that contains instruction for very different types of marine test kits

http://successfulreefkeeping.com/resource/aquarium-test-kit-instructions/

 

Dont miss Mountain West Reef Fest in Utah

If you are a reef keeper and will be in the Salt Lake Cuty area on November 2 we recommend that you swing by the red lion hotel and the Mountain view reef fest that will take place there between 9 a.m. To 5 p.m.. There is a USD 10 entry fee and the Wasatch Aquarium society has negotiated a special rate for all reef fest attendees that want to stay in the hotel. Just use the code MOUN1102 when you book your hotel to get the special rate.

Mountain West Reef Fest will feature a good group of speakers, raffles, DIY food workshop, photography workshop and vendors. A total of 12 coral vendors ate expected to sell their goods at the Mountain West Reef Fest

Amount the speakers for Mountain West Reef Fest we find Kevin Kohen, Scott Michael and Adam Blundell You can find more info on the Mountain West Reef Fest website.

Slide 1

Join your local garden club, help ”plant” corals

Working with corals might not be the first thing that comes to mind when you think about a local garden club. That is however exactly what you would be doing if you where a member of the Garden Club of the Upper Keys. They are trying to help restore corals in the local area by propagating and relocating corals.

“Gardening underwater? Yes, we’re helping to restore our precious coral reefs,” says club President Marilyn Rogers.

The Garden Club of the Upper Keys is indeed a garden club in more than only name and is a member of the Florida Federation of Garden Clubs. Florida Federation of Garden Clubs has 13,000 members in 200 clubs and have chosen to welcome the Key Largo-based Coral Restoration Foundation as a yearlong member. The fundation is helping fund the restoration work on a designated reef site on French Reef in the Upper Keys

The members of the two usually unrelated disciplines say that there are many similarities between regular gardening and ”underwater gardening”. (like most reef keepers already now)) The “right plant, right place” is as an example an important adage in both types of gardening. The process of producing and replanting plants in your garden is also rather similar.

“First the coral is grown in a nursery until it is strong enough to be attached to the reef,” Rogers said. “The branching corals are then gathered and moved to the protected staghorn or elkhorn coral areas. Site selection and preparation are key elements for success. The gardener diver decides where to site the coral, in what position and preps the spot. The corals are attached with special marine epoxy.”

To find out more, go to www.coralrestoration.org.

Captive Bred Randall’s Assessor available from ORA

ORA has released captive bred Randall’s Assessor to all of its resellers. The fish is now being shipped around the world and you might see the first fish in your local store later this week or early next week. The Randall’s Assessor is rather rare in the aquarium hobby and as such you can most likely expect these fish to be a bit more expensive than some other captive bred fish. Do not be surprised if these fish comes with a price tag of above USD 100.

ORA first acquired their Randall’s Assessor last year. The broad stock was acquired from Blue Harbor in Japan. ORA had almost immediate success with this species, something that shouldn’t be a surprise considering that ORA now have bred all known and kept assessor species. In December 2012 ORA announced that they had the first batch of fry going through metamorphosis and that they were about to change the focus of the breeding effort to ramp up numbers so that they could be released to the public. Something that they now, a mere 10 months later has been able to achieve. This feat was made a little bit easier by the fact that the Randall’s Assessor is a nest spawning species that produce large nests and quickly reach sexual maturity.

Randall’s Assessor is an excellent addition to most aquariums due to its relatively small size and its calm behavior.

Exquisite firefish, Nemateleotris exquisita

A new species of firefish, the Exquisite firefish, Nemateleotris exquisita has been scientifically described. The new species is very similar to the purple firefish but with an to me even more intense coloring. It also grows larger that the purple firefish. The body of the Exquisite firefish is lined with purple and red. There is however no description that could make this little gem justice so it is better that you just take a look at the picture above. I welcome everyone to try to formulate a good description that captures the essence of this stunning fish and post it as a comment below.

Hybrid between the exquisite and the purple firefish

Hybrid between the exquisite and the purple firefish

The new species hails from Mauritius, Kwazulu-Natal,the Red Sea as well as the the Thai coast of the Andaman Sea, and the Andaman Islands. It was described from specimens that had been collected in rather deep water around Mauritius, Kwazulu-Natal and in the Red Sea. The new species is known to breed and spawn hybrids with the purple firefix. This is a relatively common occurrence in the wild. (in comparison to other hybrids).

This species might already have been imported as Purple firefish but there is no way to know for sure at this time. The fish that is being imported as purple firefish will in the future most likely be divided into a number of different species.

To me it seems certain that we soon will see this species in the trade imported from the Maldives and perhaps also the Red Sea. It will likely be a little bit more expensive than the purple firefish due to its initial rarity and due to them being harder to catch than the purple firefish since they live in deeper water.

Keeping the Exquisite firefish in aquarium

Basic info

  • Family: Gobiidae
  • Minimum Tank Size: 20 gallons
  • Care Level: Easy
  • Temperament: Peaceful
  • Reef Compatible: Yes
  • Temperature: 72-78° F
  • dKH: 8-12
  • pH: 8.1-8.4
  • sg: 1.020-1.025

The Exquisite firefish, Nemateleotris exquisita can be kept in the aquarium in much the same way as the purple firefish and if you successfully kept purple firefish you should not have any problems keeping the Exquisite firefish. There are however a couple of things to remember. The Exquisite firefish grows larger than the purple firefish and will therefor need a larger tank. A 10 gallon tank could most likely work but we recommend giving it at least a 20 gallon tank so it has more space to roam around.

It is important that you provide the Exquisite firefish with enough suitable sized caves that they can retreat to when they feel threatened. It is a reef safe species and can be kept with mos other calm reef species. Avoid keeping them with very aggressive species.

inthewild

In the wild at 220 ft / 68 m deep

If you want to know more about this species i recommend that you the report that described the species:
Nemateleotris exquisita, a new microdesmid fish from the Indian Ocean

Tip of the Week # 3 – Waterchanges

Don’t underestimate the importance of waterchanges!

In may low demanding and more basic set-ups, weekly water changes in the range of 5% to 20% would be all that you would need to replace the consumed elements from your water as well as helping to control excesses nutrient build-up. Many people do not realize that water changes when cycling your tank can also be very important and beneficial with harming or prolonging most commonly used cycling processes.

Waterchanges when cycling a marine aquarium with at least some live rock my actually help you out down the road. This is very different from a typical fishless cycle in a freshwater aquarium. Within the nitrogen cycle that develops in your marine aquarium, you will develop bacteria that eats the proteins and turns them into ammonia.  This type of bacteria will reproduce a lot faster than the ammonia eating bacteria, so the ammonia produced can actually grow to toxic enough levels that will prolong the cycle. Typically this point occurs somewhere around 1 to 2 ppm of ammonia. This is why you have to do water changes if the ammonia reaches levels of 1 to 2 ppm or higher. The water change will help reduce the ammonia and other decaying particles from the tank helping the cycle complete faster and the water parameters become balanced quicker. Although there is some beneficial bacteria free floating in the water, it will be in such small amounts that water changes will not remove enough of them to be impactful in any way. This is why water changes when cycling with at least some live rock will help the cycle move along faster, not slow it down one bit.  This will also help to limit the potential for higher levels of nitrates before the nitrate eating bacteria has a change to develop which will reduce the risk of nitrate build up within your rock.

And the below are some more interesting article that I found and thought I would share

http://reefbuilders.com/2013/09/04/reef-octopus-nwb-sss-super-space-saver-brings-performance-smaller-package/

http://reefbuilders.com/2013/08/30/mini-flipper-algae-cleaner-brings-magnetic-flipping-action-smaller-tanks/

CAD Lights Biopellet Reactor Equipement Review

For the past few years I have been using biopellets in a traditional or common media reactor. While this traditional design has been a highly effective design for media such as phosphate removers or carbon, I have found it not to work that well when with the biopellets on the market today. In my experience, it has been challenging to maintain the biopellets properly suspended in the reactor with the correct amount of flow. Clumping and uneven biopellet movement due to uneven water flow through the reactor has always remained a challenge.

I had been looking for an alternative to the common media reactors. In early 2012, Cad Lights Aquariums launch the Conic Media Reactor (CAD Lights Biopellet Reactor), which is a new reactor designed specifically for use with biopellets. The model I purchased is the BR-1

The below information is taken directly from the manufacture’s website

http://www.cadlights.com/index.php?main_page=product_info&cPath=51&products_id=213

“Specifications
* NEW 3-way recirculating valve gives you the control of the Bio-reactor at your hands.
* Total space useage: 6″ x 6″ x 12″ (16″ high with plumbing)
* Capacity of 50G up to 350G
* Can hold up to 750ML of Bio-pellets.
* Compatibility: works best with Tapered edge or other non-perfectly round bio-pellets.
* Built in pump
* 11.5W of energy use.
* Standard 1/2″ SCH40 PVC can easily be extended to reach into other chambers for installation.
* Total silence.”

Base on my own experience, this design has two main features that make it different

1 The media chamber is an inverted triangle shape.
2 The pump is placed inside the reactor beneath the reactor chamber.

These two new features help to focus the right amount of flow even through the pellets keeping all pellets consistently moving within the reactor chamber while keeping the foot print of the reactor smaller. Based on a few weeks of use, I am extremely happy with the performance of this reactor. In my opinion, this design makes the Cad Lights Conic Media Reactor among the better reactors on the market right now.

I was also extremely impresses with the manufacture. The reactor cam very well packaged and they even went the extra mile to pre-wrap the threaded connection on the one fitting you have to screw onto the top of the with a good quality thread tap. This shows the company cares about quality.

The only drawback that I can see with this reactor design is that it does require more height clearance than a traditional media reactor which could be a limiting factor when using in an aquarium stand on aquariums smaller than 150 gallons.

Although I feel this reactor doesn’t work as well as the manufacture claims, it still is a very good quality reactor and I would recommended it to anyone who has the required room in their sump for it.

ORA Introduces the Gold Nugget Clownfish to market

The Gold Nugget maroon clownfish from ORA was first seen at Aquarama 2013 in Singapore. Now the production of this strain of clownfish has reached levels that allows ORA to release them on the market and they are now available to all ORA customers. Talk to your local reef store and ask them to bring some in if you want one.

The Guld Nugget Clownfish is a further development of the Goldflak maroon clownfish that ORA released September 2012. They where not a intentionally developed strain but rather a byproduct from increased gold flake clownfish production. When ORA started to increase production of the goldflake clownfish they discovered unique fry that were solid white and resembles Platinum percula clownfish but that develops a golden hue as they matures.

When young these gold nugget clownfish has a mostly white body with red and varying shades of red and maroon on the fins as well as the face. Some gold nugget juveniles will feature white on their face or even an tear drop under their eye. (should we guess that we will see tear drop clowns in the future?). The juveniles turns gold as they mature. When this happens depends on a number of different factors such as diet, habitat and lighting. They may start to turn gold after only 4-6 months but in most cases it takes more than a year for them to turn gold.

The Gold Nugget clownfish features a behavior such as you would expect from a maroon goldfish. They are in other words rather hardy and can be aggressive.

juvenile gold nugget clownfish

A juvenile gold nugget clown. Notice that white platinum hue in this juvenile fish. It takes from 4-6 month to more than a year for them to start to turn gold.

morphing gold nugget clownfish

This specimen has just started to turn gold and you can start to see how it will look as an adult.

Introducing the Long Finned Clownfish

I guess we all knew that it was only a matter of time until we would see this, a long finned Ocellaris Clownfish. The fish was found in a batch of fry at Sustainable Aquatics breeding facility where marine biologist Matthew Jolley thought it looked odd as a young fish and separated it from the others to prevent it from being beaten up or killer. It was being severely bullied and was injured. The parents had produced many thousands of fry but this is the first long finned fry that has been spotted.

The young long finned male has healed up and been paired with a wild caught larger female (to garantee genetic diversity) and they seem to have bonded well. They have started spawning and Sustainable Aquatics is expecting their first batch of fry any day.

It still needs to be seen whether or not the long finned ocellaris breed true but there is reason to be believe that he may and if this is the case it will likely not be long until we start seeing this long fined clownfish type in the stores.

The reason that it is likely that he breeds true is that the trait likely is dominant or partially dominant; most long fin mutations in fish are. If this is the case in the ocellaris clown fish than we can expected to see long finned versions of most color morphs as the trait get bred into existing lines.

Read Sustainable Aquatics facebook announcement here.